NDS Energy Smart-In Modified Sine Wave Inverter 12V 400W | SM400-12

SMART-IN are the inverters, remarkable for design and quality. Designed to provide high performances, maximum safety, reliability and, above all, silent operation, important for those who install the inverter inside the recreational vehicle. Thanks to the NDS advanced engineering solutions, SMART-IN inverters are also suitable for professional use.

The SMART-IN family consists of two lines: Modified and Pure distinguished by the output waveform. The two product lines cover a wide range of powers from 400W to 3000W, with the possibility (for some models) to have 24V input voltage

Main Features:

• High efficiency up to 93%
• Low self-consumption
• Input with professional connectors
• Predisposition for remote control ON/OFF
• Input and output completely isolated
• Soft Start
• Protection against overload and Short circuit
• Low battery alarm
• Protection against polarity inversion
• Over-temperature protection

Professional Connectors - Connections welded directly to the PCB with high conductivity bars prevent voltage drops, power losses and lower battery consumption.

In/Out IVT Inverter - The standard versions have one or two output sockets, while for the models with IVT (integrated priority function), there is one output socket and one input socket (IEC), protected by a fuse, where the external main is connected.

Easy Installation - The integrated mounting feet allow a safe installation in any position. Supplied with ultra-flexible input connection cables, specific and already sized for the device.

Distinctive Features:

SMART-IN inverters can boast the lowest self-consumption on the market and consider that very often an inverter remains in standby mode, thus continuing to consume current, minimizing this absorption is essential and of great benefit to the user who will not discharge the battery unnecessarily.

• The input and output are completely isolated, to avoid that any anomalies from the equipment connected to the output may damage that connected to the input and vice-versa, thus ensuring a high level of safety.
• Professional connectors which, as opposed to the standard cheaper inverters on the market, are directly integrated into the PCB, thus allowing a substantial reduction of voltage drop on the connection between the device and the battery. This improves its performance and, at the same power absorbed by 230V equipment (e.g. TVs), the battery consumption is lower than with the traditional inverters.